Custom Waterproof Labels
Choose the Right Waterproof Film for Your Product
Waterproof is not one material — it is the right film, adhesive and lamination for your exposure. BOPP suits bottles, jars and refrigerated products; vinyl flexes and weathers on curves and outdoors; polyester (PET) resists chemicals and abrasion for industrial use. We help you compare them and match the adhesive, so labels stay put through moisture, oil, cold and handling.
What Makes a Label Waterproof
A waterproof label depends on more than the face material.
Film Face
A plastic film — BOPP, vinyl or PET — that does not absorb water the way paper does, so it stays flat and legible when wet.
Waterproof Adhesive
An adhesive that holds on wet, cold or oily surfaces, so the label does not lift where a standard bond would fail.
Over-Lamination
A clear laminate over the print protects it from water, abrasion and chemicals as the label is handled.
Oil-Resistant
The right film and lamination resist oils and wipe-downs as well as water on greasy packs.
Comparing BOPP, Vinyl and PET for Waterproof Labels
Each waterproof film has strengths — this is how they compare, so you can match one to your surface and exposure.
| Material | Water | Oil | Outdoor / UV | Conformable | Cost |
|---|---|---|---|---|---|
| BOPP The everyday waterproof film for bottles and jars. | Strong | Good | Moderate | Moderate | Low |
| Vinyl Flexes on curves and holds up outdoors. | Strong | Good | Strong | High | Medium |
| Polyester (PET) The toughest for chemicals, abrasion and industrial use. | Strong | Strong | Strong | Low | Higher |
Which Waterproof Film Each Exposure Takes
BOPP, vinyl and PET fail in different places. Find the exposure your product actually meets and the film that holds up under it.
Bottles & Jars
Condensation and hand contact: white or clear BOPP, with a permanent acrylic adhesive.
Outdoor & Marine
UV, salt and long outdoor exposure: vinyl or PET, laminated, on a high-tack adhesive.
Cold & Freezer
Freezer-grade options for refrigerated and frozen products.
Oily Surfaces
Oil-resistant film for sauces, lubricants and greasy packs.
Bath & Shower
Labels for products handled wet daily.
Industrial
Durable labels for chemical and equipment use.
Waterproof Adhesives for Wet, Cold and Oily Surfaces
The adhesive matters as much as the film — waterproofing fails if the label lifts, so the bond has to suit the surface it goes on.
Permanent
A lasting bond for most waterproof labels — applied to a clean, dry surface, it stays put once the film takes moisture in service.
Freezer-Grade
Bonds at low application and storage temperatures, so labels hold on refrigerated and frozen products where a standard adhesive would let go.
Aggressive / High-Tack
Grips rough, oily and curved surfaces that a standard adhesive cannot key into, so the label anchors instead of peeling at the edge.
Removable
Peels clean without residue where labels must be repositioned or removed — for returnable packs and short-term uses.
When to Choose BOPP, Vinyl or PET
Match the material to your surface and exposure — here is where each waterproof film fits.
Choose BOPP
For flat bottles, jars and refrigerated products where you want everyday waterproofing at a low cost.
See BOPP labelsChoose Vinyl
For curved, squeezable and outdoor products that need flex and weather resistance the film can bend to.
See vinyl labelsChoose PET
For chemical, abrasion and industrial exposure that needs the toughest film to survive solvents and rough handling.
See industrial labelsWhat Our Waterproof Label Work Covers
Flexible waterproof label solutions across BOPP, vinyl and PET film.
BOPP / Vinyl / PET Options
The right waterproof film for your product, chosen from three material families in one place.
Waterproof Adhesives
Permanent, freezer-grade and aggressive options that hold on wet, cold and oily surfaces.
Over-Lamination
A clear laminate that adds water, abrasion and chemical protection over the print.
Oil-Resistant
Films and lamination that resist oils as well as water on greasy and wiped-down packs.
Material Guidance
We help you choose the right waterproof build for your surface, from a standard MOQ of 200 pcs.
Delivery for Waterproof Runs
Rolls are laminated and wound before they leave, so the print is protected on the way to you.
Waterproof Labels FAQs
BOPP for bottles and jars, vinyl for curves and outdoor, and polyester (PET) for chemical and industrial — matched to your exposure.
Film faces and over-lamination resist oils as well as water; PET is strongest for solvents.
Yes, with freezer-grade adhesive and a suitable film for cold storage.
The adhesive and over-lamination — a film face alone can still lift if the adhesive is wrong.
Vinyl and PET with UV-stable inks and over-lamination suit outdoor and marine use.
PET is tougher for chemicals and abrasion; BOPP is a lower-cost everyday waterproof film.
Yes. Material samples may be available to compare waterproof films before production.
Order Custom Waterproof Labels From CNNLABEL
Tell us about your surface, exposure and order quantity, and our team helps you choose the right waterproof film and adhesive.